- WHAT IS TO BE TAKEN INTO ACCOUNT WHEN IMPLEMENTING X-RAY TUBES AND X-RAY TUBE ASSEMBLIES?
-
- The HV-power supply used has to have a control circuit with filament current limit. It may only be adjusted to the specified manufacturers´ instructions (e.g. data sheet) to prevent overheating the filament when turned on. (See our application notes respective life time)
- Before use, the x-ray tube assembly must be stored for at least 48 hours at room temperature
- We recommend a warm-up before initial operation, see application notes
- WHAT IS THE LENGTH OF AN X-RAY TUBE’S / X-RAY TUBE ASSEMBLY’S LIFE TIME?
-
- That depends on the operating conditions or the operating parameter, respectively
- See also our application notes
- The warranty is 12 months, see GTC
- IS THE FOCAL SPOT ADJUSTABLE WITH GRID CONTROL?
-
- The focal spot declared on our final test data sheet match the actual focal spot of the x-ray tube in standard operation
- The grid control can be used to „close“ or „pulse“ the x-ray tube, see also our application notes
- THERE ARE SPECIAL PROCEDURES FOR TRANSPORT – WHAT SHOULD BE CONSIDERED?
-
- The packaging is to be chosen in such a manner as to avoid hits
- If you receive the goods through a carrier, they should be examined for damages
- Since the package can be opened by customs, the goods need to be examined for damages upon receipt
- CAN THE FRACTURE OF AN X-RAY TUBE BE ASSESSED WITHIN THE X-RAY TUBE ASSEMBLY?
-
- See our application notes respective x-ray tube assembly rapid test
- IS THE CHANGE OF THE X-RAY TUBE WITHIN THE RADIATION PROTECTION HOUSING OR A REPAIR OF THE X-RAY TUBE ASSEMBLY POSSIBLE?
-
- An x-ray tube change is only possible at our facility
- The parts are not repairable by the customer
- In case of disassembling or loosening of attachments on the x-ray tube assembly by the customer the right to guarantee is expired
- ARE THERE SPECIAL TERMS FOR THE DISPOSAL OF X-RAY TUBES AND X-RAY TUBE ASSEMBLIES?
-
- The waste oil is to be disposed of in a proper manner
- The Be-windows are also to be turned over to a processing plant
- We offer a proper disposal within our facility
OUR SLOGAN „GEHT NICHT, GIBT’S NICHT!“ – ANYTHING CAN BE DONE.
HAVE WE MADE YOU CURIOUS?
HAVE WE MADE YOU CURIOUS?
PETRICK GMBH
Zu den Pfarreichen 2
07422 Bad Blankenburg
Germany
CONTACT
info@petrickgmbh.de
Tel.: +49 (0) 367 41 5868 0
Fax: +49 (0) 367 41 5868 68
